- Home
- ยป
- Our Product Range
- »
- Fabric Testing Equipments
Fabric Testing Equipments
Elmendorf Tearing Tester
Brand | Globe Enterprises |
Frequency | 50 Hz |
Sample Dimension | 100 x 63 mm |
Instrument Dimension | 400 x 210 x 390 mm |
Power Source | Electric |
Voltage | 220 V |
Digital Bursting Strength Tester
Grade | Semi Automatic |
Display Type | Digital |
Voltage | 220 V |
Brand | Globe Enterprises |
Frequency | 50 Hz |
Opening Upper Clamp Diameter | 35.5 mm |
Fluid Displacement | 95 to 170 CC/Minute |
Opening Lower Clamp Diameter | 38.1 mm |
Bursting strength of any material such as fabric, leather, paper etc. is its strength under multi-directional force and is defined as the hydrostatic pressure required to produce rapture of the material when pressure is applied at a controlled increasing rate through a rubber diaphragm. The Digital Bursting Strength Tester is designed to find bursting strength of fabric / leather / paper / paperboard. A test specimen is held between two annular clamps under sufficient pressure to minimize slippage. The upper clamping surface, which is in contact with the test specimen, has a continuous spiral groove and the lower clamping surface has a number of concentric grooves.
Button Snap Pull Tester
Brand | Globe Enterprises |
Material | SS |
Automation Grade | Semi-Automatic |
ASTM Designation | D1776ASTM PS79-96 |
CFR Part | 1500.50 53 |
The assessment of snap attachment strength is an important criterion of the textiles especially in the design of garments of infants so the Button Snap Pull Tester is designed to test the same. Its user-friendly equipment to test Snap Strength of buttons/rivets/joints to ensure that it meets design tolerance and safety levels, particularly in baby clothing this is also used to prevent the separation between the snap and the garment.
Traverse Thread Counter
Brand | Globe Enterprises |
Material | SS |
Display Type | Digital |
Voltage | 220 V |
Frequency | 50 Hz |
One of the most common measure of the quality of a fabric is the number of threads per unit length in both the warp and weft directions, or its picks and ends.
Picks and ends of any fabric are normally determined with the help of an ordinary counting glass having a square or rectangular opening of specified size. However, when a greater degree of accuracy in determination of picks or ends is needed, or the weave is too fine to be checked with an ordinary counting glass, this counting is carried out with the help of a traverse thread counter.
Standard:
- IS 1963-1981 :Methods for Determination of Threads Per Unit Length in Woven Fabrics
Pressure Head Tester
Automation Grade | Semi-Automatic |
Brand | Globe Enterprises |
Frequency | 50 Hz |
Voltage | 220 V |
Test Specimen Diameter | 200 mm |
Test Area Diameter | 100 mm |
Pressure Head | 300 mm of Water Column |
Test Duration | 60 Minutes |
Digital Demattia Flexing Fatigue Tester
Minimum Order Quantity: 1 Unit
Weight | 55 Kg |
Type Of Testing Machines | Fabric and Footwear Testing |
Automation Grade | Semi-Automatic |
Material | SS |
Phase | Single Phase |
Display Type | Digital |
Frequency | 50 Hz |
Dimension | 430 x 430 x 720 mm |
Driven Type | Electric |
Brand | Globe Enterprises |
Voltage | AC 220 V |
Current | 3 A |
Standards: IS 7016 (Part 4)
Additional Information:
- Delivery Time: 3 to 4 weeks
Digital Air Permeability Tester
Packaging Type | Wooden Box |
Brand | Globe Enterprises |
Material | SS |
Power Source | Electric |
Frequency | 50 Hz |
Voltage | 220 V |
Display Type | Digital |
Test Area | 10, 20, 50, and 100 cm2 |
Rotameters | 9 to 90, 65 to 650, 360 to 3,600, and 1,940 to 19,400 LPH at NTP (Accuracy +- 3% of FSR in Each Range |
Air permeability is the property of a fabric to allow passage of air through it under the effect of a difference in pressure across its two faces. It is defined as the volume of air passing through a defined area under a specified pressure difference over a known period of time. It is a very important property for fabrics which are used under conditions where it is necessary to know precisely the amount of air passing through it.
Standards:
- IS 11056-1984
- DIN 53887
- ASTM D 737
GSM Round Sample Cutter
Material | SS |
Brand | Globe Enterprises |
Frequency | 50 Hz |
Voltage | 220 V |
Circular Specimen Area | 100 cm |
Round sample cutter for determination of GSM of any material in film form such as carpet, coated fabrics, fabrics, felt, foam, paper or paper board, or plastic sheets is used for preparing test specimens out of the material under test.
The GSM Round Sample Cutter cuts out circular test specimens of 100 cm² area rapidly and accurately. Grammage or GSM of the material under test is determined by multiplying the mass of the circular specimen obtained by 100.
The equipment consists of an aluminum body fitted with a set of four replaceable blades and also provided with safety catch lock. The reversible blades allow the use of all the four edges of each blade. Two special cutting pads are provided with the unit.
The sample to be cut is placed on the cutting pad on which the sample cutter is placed. After releasing the safety catch lock, a slight pressure is exerted on the hand wheel to bring the blades into contact with the fabric. The hand wheel is then rotated under pressure to cut out the specimens.
Martindale Abrasion Tester
Automation Grade | Semi-Automatic |
Brand | Globe Enterprises |
Material | SS |
Frequency | 50 Hz |
Voltage | 220 V |
Number of Test Specimen | 4 |
Outer Page Speed | 2-47.5 RPM |
Speed of Outer Peg to Central Peg Ratio | 32 Ratio 30 |
Peg Stroke | 60.5 mm |
Working Area of Specimen Holder | 6.45 cm2 |
Test Specimen Pressure | 3, 6, 9 & 12 KN / m2 |
Standard: IS 12673–1989, BS Handbook 11, BS EN 344; 1992, IS15298(Part1)-2002, Part 1, ISO 8782-1–1998
Bundesmann Water Repellency Tester
Grade | Semi Automatic |
Brand | Globe Enterprises |
Material | SS |
Frequency | 50 Hz |
Voltage | 220 V |
Dimension | 400 x 100 x 110 mm |
Weight | 60 Kg |
Standards | IS 392-1975 |
Air Permeability Tester
Packaging Type | Wooden Box |
Brand | Globe Enterprises |
Frequency | 50 Hz |
Voltage | 220 V |
Display Type | Digital |
Grade | Semi-Automatic |
Test Area | 10, 20, 50, and 100 cm2 |
Air permeability is the property of a fabric to allow passage of air through it under the effect of a difference in pressure across its two faces. It is defined as the volume of air passing through a defined area under a specified pressure difference over a known period of time. It is a very important property for fabrics which are used under conditions where it is necessary to know precisely the amount of air passing through it.
Crock Meter Machine
Brand | Globe Enterprises |
Automation Grade | Semi-Automatic |
Display Type | Digital |
Power Source | Electric |
Voltage | AC 220 V +-10% |
Power | 40 W |
Frequency | 50 Hz |
Weight | 15 Kg |
Standards: IS 1259-1984, IS 2076-1981
Demattia Flex Tester
Material | Stainless Steel |
Packaging Type | Wooden Box |
Display Type | Digital |
Frequency | 50 Hz |
Voltage | 220 V |
Brand | Globe Enterprises |
Flexing Frequency | 300 +- 12 CPM (5.0 +- 0.2 Hz) |
Test Specimen Dimension | 125 x 37.5 mm |
Maximum Distance Between Grip | 70 +- 1 mm |
Minimum Distance Between Grip | 12.5 +- 0.5 mm |
Travel of Moving Grip | 57.5 +- 0.5 mm |
Standards: IS3400(Part7)-1967, IS 3400 (Part 8)-1983, BS 903 (Part-A10)-1984, ISO R 132-1983
Flammability Tester
Material | SS |
Brand | Globe Enterprises |
Voltage | AC 220 V |
Frequency | 50 Hz |
Weight | 25 Kg |
Standards | IS 11871-1986 |
Power source | Electric |
Dimension | 750 x 360 x 940 mm |
Pilling Tester
Brand | Globe Enterprises |
Inside Wooden Box Dimension | 225 x 225 x 225 mm |
Cork Lining Thickness | 3 mm |
Rubber Tubes Dimension | 32 x 25.5 x 140 mm (Outer Diameter x Inside Diameter x Length) |
Voltage | AC 230 V |
Phase | Single Phase |
Power | 1/4 HP |
Counter | 5 Digit |
Drape Meter Testing Equipment
Standard | IS 8357-1977 |
Brand | Globe Enterprises |
Size of Specimen Support | 125 mm x 60 mm (Diameter x Height) |
Test Specimen Size | 250 mm (Diameter) |
Exposing Chamber Size | 400 mm x 400 mm x 800 mm |
Developing Chamber Size | 400 mm x 400 mm x 200 mm |
Spray Tester
Grade | Semi Automatic |
Brand | Globe Enterprises |
Power Source | Electric |
Test Area Diameter | 150 mm |
Spray Nozzle | 38 mm Diameter Having 19 Holes |
Rate of Water Spray | 250 ml in 25 to 30 Second |
The Spray Tester is a fairly simple test for assessing the resistance of fabrics or clothing leathers to wetting by water (water repellency). In this test water is sprayed against the taut surface of the test specimen under controlled conditions, producing a pattern of wetting whose size depends on the relative repellency of the sample. The pattern of wetting is compared against Standard Spray Test Ratings and the sample rated accordingly.
Related Standards:
- IS 390 : 1975 : Method for Determining the Water Repellency of Fabrics by Water Spray Test
- IS 5914 : 1970 : Methods of Physical Testing of Leather LP 26 : Spray Test for Estimating Water Repellency of Clothing Leathers
- ASTM D 1913:1963 : Standard Test Method for Resistance to Wetting of Garment type Leathers (Spray Test)
Stiffness Tester
Frequency | 50 Hz |
Voltage | AC 220 V |
Weight | 17.5 Kg |
Brand | Globe Enterprises |
Pressing Board Size | 25 x 250 mm |
Pressing Board Speed | 3~5 mm/s |
Power | 300 W |
Dimension | 450 x 250 x 400 mm (LxWxH) |
Standard:
- IS 6490–1971
- ASTM D 1388–1996
- ASTM D 5732–1995
- BS 3356–1964
Water Penetration Resistance Machine
Brand | Globe Enterprises |
Material | Iron |
Voltage | 220 V |
Frequency | 50 Hz |
Color | Blue |
Usage/Application | Textile Industry |
Crack Testing Type | Hydrogen Crack |
Standard | IS 7016 (Part 7)-1986C |
The offered machine is extensively used for checking the water penetration resistance of the coated fabrics known for its non-corrosive properties and fine finish, the whole range of high-quality products offered by us is widely applauded among our valued customers.
Stainless Steel Perspirometer
Brand | Globe Enterprises |
Material | SS |
Test Specimen | 10 x 4 cm |
Acrylic Plate Dimension | 11.5 x 6.0 cm |
Number of Acrylic Plates | 16 |
Standard:
- IS 971-1983
- AATCC 15-1997
- ISO 105 (Part E04)-1983
- Part E 04